Tuesday, March 17, 2009
Impress Your Closed friend by gifting the diamond jewellery
Diamond rings are the most attractive jewellery in today's market. These rings come in sleek designs that enhance the beauty of a woman.Diamonds are one of the most precious stones which are popular in all age groups of people. Each person wants to purchase these elegant diamonds. A person enhances his personality with a proper selection of clothes and jewellery. Now-a-days, there are many types of jewellery available in the market such as Diamond, Gold and Silver jewellery. But, today Diamond jewellery is in vogue. This jewellery comes in many colours such as blue, pink, grey, yellow and white. You can choose your jewellery that suits best with your dress.If you want to please a woman, then you can purchase a diamond ring or diamond earrings for her. These gifts will definitely bring a big smile on her face.
Halo diamond ring with yellow cushion cut diamond
Natural Light Yellow (Y-Z range) cushion cut halo diamond ring bezel set in a micro platinum custom semi mountMonday, March 16, 2009
Thursday, March 12, 2009
Rolex Yacht-Master II Regatta Chrono at BaselWorld
Finally Rolex has come out with a newer design. The majority of their watches have stayed basically the same for many years, which is good and bad. I like the bold new design and I think this type of watch might help attract other buyers that would not normally buy a Rolex because of the old school look. On the other hand I am sure buyers that do purchase a Rolex because of the traditional look will probably not like this particular model as much. Either way here is a nice shot of the new Rolex Yacht-Master II Regetta Chrono that was just introduced at BaselWorld.
Most Expensive Watch
was thrilled to see the inclusion of a few incredibly rare and complicated masterpieces by luxury watchmaker Jean Dunand
This complication watch by Jean Dunand, is absolutely "drool worthy"!
Diamonds | Historical Diamond Cuts & Cutting History
Diamond Cutting Historical Timeline1200s and Before Early taboos against the cutting and shaping of 'adamas' (diamonds) may have had more to do with practical necessity than superstition, given the difficulty in cutting the stone. As decorative objects, stones were used in their natural octahedral shape, with only minor cosmetic cleanup and polishing. These taboo may have originated in India, and spread to Europe in the early stages of the diamond trade. 1300s In 1375, the first guild of diamond cutters and polishers (diamantaire) was formed in Nürnberg, Germany. The "Point Cut" was a major advancement during the latter half of the 14th century. The Point Cut follows the natural shape of an octahedron shaped raw diamond, eliminating waste in the cutting process. During the mid 14th century improvements where made to the Point Cut by cutting off some of the octahedron's top half to create a "Table Cut." During this period, the culet was added to the pavillion of the Table Cut. By the end of the 14th century, the addition of four corner facets created the "Old Single Cut" (aka Old Eight Cut). None of these early cuts showed a diamond's true brilliance or fire by taking advantage of the stone's high dispersion, and the cut stone would appear dark to the naked eye. It was for this reason the colored gemstones maintained their popularity over diamonds throughout this period. 1400s In 1475 Lodewyk (Louis) van Berquem, a Flemish stone-polisher from Bruges, Belgium, introduced the concept of absolute symmetry in the placement of facets on the stone. His advancements produced the pear-shaped "Pendeloque" or "Briolette" cut (below, center). The 55k Sancy Diamond (Maharaja of Guttiola) and the 137k Florentine Diamond (Medici Family - Duke of Burgundy 1467), are both Briolette cuts, and it has been reported that van Berquem was their creator. The pendeloque shape was not commercially viable due to its lack of fire, dispersion or brilliance (play of light). There was a large amount of waste in the cutting process, and the shape was only suitable for certain odd shapes of rough diamond. 1500s 16th century gem cutter Giacomo Tagliacarne and Renaissance gem-cutter Giovanni delle Corniole further perfected the art of facetted gem cutting. During this period a new type of cut known as the "Rose" or "Rosette" was introduced (above center). The Rosette was a popular cut for over a century due to the higher amount of brilliance it produced when compared with the Pendeloque cut and the reduction in the loss of weight in the cutting process. The drawback was that the stone needed to be cut thick in order to reduce light loss and this cut did not produce sufficient fire. These limitations eventually lead to the invention of the Brilliant cut. 1600s 17th century French jeweler, Jean-Baptiste Tavernier (1605 -1689), was one of the early pioneer's of Europe's diamond trade with India. Although he was born in Paris, his ancestors were from Antwerp, Belgium. In his book "The Six Voyages of Jean-Baptist Tavernier" he documented many historically significant diamond cuts from India's past (top and below).
The Florentine Diamond (above, right) was originally owned by the Duke of Burgundy (mid 1400s) of the Medici Family. Jean Baptiste Tavernier (above, left) documented the stone's cut with his drawing (above, center) from 1657 when it was in the collection of the Grand Duke of Tuscany. The last known photo of the Florentine Diamond was from the late 1800s, when it was set in a hat ornament from the Hapsburg Crown Jewels.
The first "Brilliant" cut was introduced in the 17th century and is largely credited to Italian ambassador, Jules Cardinal Mazarin. Born Giulio Raimondo Mazzarino, Cardinal Mazarin had a long-standing fascination for gemstones. The first Brilliants were known as "Mazarins" and were called "Double-Cut Brilliants." These Double-Cut Brilliants had 17 facets on the crown. A 17th century Venetian polisher named Vincent Peruzzi introduced the "Triple-Cut Brilliant" or "Peruzzi Cut" by doubling the number of crown facets from 17 to 33.
Ownership of the famed Koh-i-Noor diamond (below, center) transfered from the Sultan of Golconda (early 1600s), to Prince Aurangzeb of Persia in the mid 1600s, as documented by Jean-Baptiste Tavernier in his "The Six Voyages" (above). Prince Aurangzeb is credited for the stone's accidental reduction in size from the original 793 carats to a modest 186 carats, due to a gem-cutter's mistake.
During the mid 1500s, a French ambassador to Turkey, Nicholas Harlai, Seigneur de Sancy purchased a 55 carat pear shaped diamond (The "Sancy Diamond", below left) that was sold to Cardinal Mazarin in the mid 1600s, Russian Prince Anatole Demidoff in the mid 1800s, and to William Waldorf Astor in the early 1900s.
1700s
Double-Cut Brilliants (Mazarins) and Triple-Cut Brilliants (Peruzzi Cuts) from the 1700s were cushion cuts rather than circular or round cuts. The technique of "Bruting" had not yet been invented, so the stones were cut as squares or rectangles with rounded corners. These cushion-cut brilliants are known today as "Old Mine Cuts."
1800s
The Koh-i-Noor changed ownership several more times from the Nadir Shah of Persia in the early 1700s, to Shah Shuja in the early 1800s. When Shah Shuja was overthrown in 1810, he sought refuge in Lahore, India, taking the Koh-i-Noor with him. Shah Shuja (and the Koh-i-Noor) remained under the protection of Raja Ranjit Singh until after the Raja's death, when Punjab came under British control. The Koh-i-Noor remained in the Lahore Treasury until 1848 when, according to the terms of the "Treaty of Lahore", the British East India Company transported the gem to the British Empire.
The Koh-i-Noor diamond was re-cut to 105 carats for Queen Victoria (Empress of India) in 1851 by a stone-cutter from Amsterdam. Using a steam-driven cutting wheel, it took 38 days to complete the cutting. It is now in the Tower of London, where it is set in Queen Elizabeth's crown.
1900s
In the early 1900's, the development of diamond saws and jewelry lathes enabled the development of modern diamond cuts, including the Round Brilliant cut. The modern Round Brilliant consists of 58 facets - 57 if the culet is excluded. There are 33 on the crown and 25 on the pavilion. In recent decades, most girdles are faceted. Many girdles have 32, 64, 80, or 96 facets.
On June 25 1905 the largest rough gem-quality diamond in the world was found by Frederick Wells, of the Premier Diamond Mining Company in Cullinan, Gauteng Province, South Africa. Called the "Cullinan Diamond" it weighed 3,106.75 carats or 621.35 grams. The largest polished gem cut from the stone is named the "Great Star of Africa" (above, right) and was 530.2 carats.
Even with modern techniques, the cutting and polishing of a diamonds resulted in a loss of as much as 50% of the stone's total weight. The round brilliant cut is preferred when the crystal is an octahedron, as two stones could be cut from one crystal. Asymmetrical crystals such as macles are usually cut in a "Fancy" style.
Ownership of the famed Koh-i-Noor diamond (below, center) transfered from the Sultan of Golconda (early 1600s), to Prince Aurangzeb of Persia in the mid 1600s, as documented by Jean-Baptiste Tavernier in his "The Six Voyages" (above). Prince Aurangzeb is credited for the stone's accidental reduction in size from the original 793 carats to a modest 186 carats, due to a gem-cutter's mistake.During the mid 1500s, a French ambassador to Turkey, Nicholas Harlai, Seigneur de Sancy purchased a 55 carat pear shaped diamond (The "Sancy Diamond", below left) that was sold to Cardinal Mazarin in the mid 1600s, Russian Prince Anatole Demidoff in the mid 1800s, and to William Waldorf Astor in the early 1900s.
1700s
Double-Cut Brilliants (Mazarins) and Triple-Cut Brilliants (Peruzzi Cuts) from the 1700s were cushion cuts rather than circular or round cuts. The technique of "Bruting" had not yet been invented, so the stones were cut as squares or rectangles with rounded corners. These cushion-cut brilliants are known today as "Old Mine Cuts."
1800s
The Koh-i-Noor changed ownership several more times from the Nadir Shah of Persia in the early 1700s, to Shah Shuja in the early 1800s. When Shah Shuja was overthrown in 1810, he sought refuge in Lahore, India, taking the Koh-i-Noor with him. Shah Shuja (and the Koh-i-Noor) remained under the protection of Raja Ranjit Singh until after the Raja's death, when Punjab came under British control. The Koh-i-Noor remained in the Lahore Treasury until 1848 when, according to the terms of the "Treaty of Lahore", the British East India Company transported the gem to the British Empire.
The Koh-i-Noor diamond was re-cut to 105 carats for Queen Victoria (Empress of India) in 1851 by a stone-cutter from Amsterdam. Using a steam-driven cutting wheel, it took 38 days to complete the cutting. It is now in the Tower of London, where it is set in Queen Elizabeth's crown.1900s
In the early 1900's, the development of diamond saws and jewelry lathes enabled the development of modern diamond cuts, including the Round Brilliant cut. The modern Round Brilliant consists of 58 facets - 57 if the culet is excluded. There are 33 on the crown and 25 on the pavilion. In recent decades, most girdles are faceted. Many girdles have 32, 64, 80, or 96 facets.
On June 25 1905 the largest rough gem-quality diamond in the world was found by Frederick Wells, of the Premier Diamond Mining Company in Cullinan, Gauteng Province, South Africa. Called the "Cullinan Diamond" it weighed 3,106.75 carats or 621.35 grams. The largest polished gem cut from the stone is named the "Great Star of Africa" (above, right) and was 530.2 carats.
Even with modern techniques, the cutting and polishing of a diamonds resulted in a loss of as much as 50% of the stone's total weight. The round brilliant cut is preferred when the crystal is an octahedron, as two stones could be cut from one crystal. Asymmetrical crystals such as macles are usually cut in a "Fancy" style.
Diamond Wedding Jewelry Heart Diamond Collection — Setting Only w/out Diamond — 14K Two-Tone Gold
A truly high quality jewelry piece heart design diamond engagement ring.
Band measures 5mm wide. * Setting Only.
Band measures 5mm wide. * Setting Only.
Diamond Wedding Jewelry Art Deco Diamond Ring in 1/2 Carat, 14 Karat Two-Tone Gold
14 karat Solid Two-Tone Gold Art Deco Ring with 1/2 Carat Diamond.Harmonious, slender and deliciously intricate, this engagement ring revels in fabulous Art Deco period design. Swirling flower and petal motif is delicately etched into the smooth 14 karat white gold shank. An intricate, lustrous yellow gold lotus flower opens to offer your love one pure, precious, brilliant round diamond.
Diamond
Carat (Weight) 1/2 carat (0.50 carats)
Color H-I (near colorless)
Clarity I (small inclusions)
Price: $1075
Diamond Wedding Jewelry Pear Cut 1 Carat Diamond Solitaire
The dazzling look of a single solitaire diamond ring is a timeless classic whose simplicity and grace can never be compared. A fiery Pear cut diamond is securely prong set on a sleek band crafted in smooth 14k Yellow Gold. The piece is masterfully balanced and has exceptional elegance that will reflect forever.Are Diamonds Really Rare?
When you walk into a jewelry store and see all the diamonds in all of the various settings that are for sale, it is difficult to realize that diamonds are indeed rare. Most people don't even stop to consider how that diamond came to be sitting in that jeweler's case! There is quite a bit of work that is done before a diamond is ready to sell to thegeneral public!For every one million diamonds that are mined, only one will be found that is a quality one caret diamond. In order to find a two caret diamond, about five million diamonds must be mined. More than two hundred tons of ore must be mined to find one small diamond, and even then, more than 80% of the diamonds that are mined are onlygood for industrial use, such as diamond drill bits.
14K Gold Vintage Merry Christmas Charm
Jewelry InformationBrand Name: The Way We Were
Metal stamp: 14k
Metal: yellow-gold
Material: yellow-gold
Length: 1.12 inches
Total metal weight: 4 Gram
Egyptian "PEACE" Cartouche - Solid Style - in Silver, Gold or Silver with Gold
Egyptian Cartouche Pendant - Solid Style - with "Peace" in Ancient Egyptian Hieroglyphics; in Silver, Gold, or Silver with Gold hiroglyphics. Made by Hand in Egypt.
Jewelry Information
Brand Name: Discoveries
Width: 0.25 inches
Length: 2 inches
Total metal weight: 4 Gram
Egyptian "PEACE" Cartouche - Solid Style - in Silver, Gold or Silver with Gold
Stunning solid 10k. gold, genuine diamond Cross Pendant with Round cut diamonds; The Lengthr of the Pendant is about 26mm including the loop and the width is about 13mm. Chain is NOT included.
14k Gold, Round, Diamond Stud Earrings (1/4 cttw, I-J Color, I1-I2 Clarity)
No jewelry wardrobe is complete without a classic pair of diamond earrings. Suffice it easy to use during the day, still shining in evening dress and offers all the complexity and versatility in a beautiful package. This classic poles, available in 14 carat white or yellow gold, showcase another round cut diamonds weighing 1 / 4 carats on four legs configuration. Diamonds with great splendor and brilliance. With a minimum rating of color , almost colorless and white in their eyes. Small inclusions, it is difficult to understand, with the eye, they deserve assess clarity rating I1-I2. These prominent positions in friction with the closure.
Subscribe to:
Posts (Atom)